Some Valuable Information About Your Water Heater Maintenance in Colorado Springs

by | Oct 19, 2016 | Plumbing

Water heater maintenance in Colorado Springs isn’t that hard for homeowners to do, and it can help them get more out of their water heaters. One of the first things that needs to be done is checking the temperature that the water heater is set to. When heaters have temperatures that are set too high, they can end up heating up too much. Overheating can definitely reduce the lifespan of a water heaters. Ideally, the temperature setting shouldn’t be any higher than 120 degrees Fahrenheit. The temperature control knob will be directly on the outside of the unit.

Water Heater Maintenance in Colorado Springs isn’t just about checking temperatures. As water heaters are used, sediment builds up. Excessive accumulation of sediment can cause a water heater to corrode. Rust might even start to get into the water. When homeowners notice that their water has a tint of rust to it, they should check their water heaters. If the heater is too corroded, it will need to be replaced. Older water heaters that haven’t been properly cared for are likely to have problems with sediment accumulation. If a person doesn’t want to flush their unit themselves, they can browse our website to get help.

Fortunately, flushing a water heater is something that a good number of homeowners should be able to do on their own if they wish to do so. A large bucket should be placed beneath the valve that drains the water heater. The valve will be located near the bottom of the unit. For some heaters, a screwdriver will be needed to turn the valve so that draining can be done. There are other heaters that have easy-to-use handles that don’t require any additional tools to work. After draining gallons of water from the tank, the valve can be turned back into its original position.

When water heaters have to be replaced, consulting with a contractor is the best course of action. A contractor can help a homeowner gauge their needs and steer them to the right type of unit. Buying units that are too small or too large is a problem that can easily be avoided with the right help.

Related Posts