Anything that causes strain on a well pump may cause it to prematurely fail. Understanding what leads to a malfunctioning well pump can let a person also know when it is time to call the professionals for a new Water Pump Solution. In most cases, the issues with water pumps are ones that should not be handled by amateurs.
The first thing that needs to be done if there is no water is to shut off the electrical power to the pump and to the water heater. That will help prevent the possibility of additional damage. The next step is to find the cause of the issue. To find the best Water Pump Solution, a person should contact an experienced and reputable contractor.
Signs of a Problem
If there is a reduction in water pressure, this is a definite indication that there is an issue with the water pump. Some other signs of an issue include dirty water, higher than normal electric costs, air “spitting” out of the faucet, odd or loud noises. The fact is, anything that causes strain on the well pump can cause it to prematurely fail.
Loss of Pressure in the Expansion Tank
The tank serves as a closed container for the pump to fill up with water. As the water fills up the tank, the air is compressed until it trips the pressure switch. When a faucet is turned on, the air pressure in the tank forces the water out. If the pressure is not present, then the pump has to work doubly hard to keep the tank full.
Not Handling Repairs in a Timely Manner
It is essential to maintain and repair a water pump on a regular to do this. Some of the most common repairs include replacing the pressure switch and the tank.
Don’t underestimate the benefits of a properly working water pump. However, if an issue is present, it is best to call the professionals for help. They can quickly evaluate the problem and determine the proper repairs. More information about water pump repairs can be found by contacting the staff at Bode’s Electric & Plumbing Inc. You can also connect them on Facebook for more updates.